HansiBond®PU 3002 S is a medium-strength, thixotropic 2-component adhesive based onpolyurethane, used for a wide range of applications.
HansiBond®PU 3002 S is used for bonding composite elements, metals, and SMC/FPR. Thisproduct is characterized by its wide range of applications in manufacturing,assembly, and repair. It cures without visible shrinkage and is easily sandableafter reaching initial strength.
HansiBond®PU 3002 S is used for bonding composite elements, metals, as well as glass fiber and carbon fiber reinforced plastics. It is perfectly suited for bumper repair, as well as other repair purposes in construction as also transportation fields.
Highly recommended for bodywork where a slight damping performance is required or strong bond to plastics is required.
Sizes available:
400 mL PE cartridge
20 L bucket
200 L barrel
others on request
The resin contains hydroxyl group-containing compounds and mineral fillers. The hardener HansiBond® PU HD 3002 S is an isocyanate-containing prepolymer. Due to its innovative formula, this product adheres particularly well to a wide range of plastics.
Surface preparation:
Surfaces must be clean, dry and free from grease, oil,
dust and contaminants.
Curing conditions:
The adhesive cures at a room temperature above 15°C. The curing time can be reduced by heat curing up to 60°C. The bonded component must remain fixed until initial strength is achieved. Final strength is reached after several days.
Storage conditions:
The product must be stored at temperatures between 10°C and 30°C. Higher temperatures shorten the specified shelf life. Lower temperatures temporarily increase the viscosity of the components. This can be compensated by timely acclimatization to room temperature before processing. Direct sunlight, heat, frost, or moisture must be avoided. After opening the containers, the hardener in particular must be protected from moisture.
Fill out the form to get the data sheet via email and reach out if you have further questions.